2 Plumbing Problems Caused by High Water Pressure

When you move into a house, high water pressure might seem like a positive attribute. Instead of calling a plumber, you might show off your powerful sink sprayer or enjoy quickly filling bathtubs. Unfortunately, the plumbing lines in your house aren't necessarily designed to handle extra water flow. Here are two plumbing problems caused by high water pressure, and why you should take the issue seriously.

1: Water Hammer

Do you ever hear banging and clanking inside of your walls? Although you might write off the problem as a normal sound, the fact of the matter is that noise might be caused by excess water pressure. When you use a faucet and the pressure is too high, water rushes through the pipe so quickly that it can actually make the pipe move. This occurrence, also called water hammer, can cause your pipes to bang together—quickly damaging pipe exteriors, fittings, and joints.

Unfortunately, some people assume that they can fix water hammer by simply securing pipes to studs, or adding extra noise-dampening insulation. While these tactics might work for a while, they aren't a permanent solution for water hammer. Always contact a professional plumber if you notice that your plumbing is noisy. An expert can test your water pressure, and then install a pressure regulator to take some of the burden off of your pipes.

2: Exacerbated Leaks

Over time, high water pressure can corrode pipe interiors, and they can spring leaks.  Unfortunately, if your noisy pipes do start dripping, high water pressure can exacerbate the leak, causing loads of damage in no time. As water escapes through that tiny hole, it can even damage the surrounding pipe, causing large fractures where water can gush freely. If you aren't around when a pipe bursts, you might be left cleaning up a flooded home or basement.

Unfortunately, some leaky pipes can be difficult to find, especially if they are buried behind a wall. You might not know that you have a leakage problem until your paint starts bubbling or you discover mold behind some old wallpaper. However, professional plumbers can use moisture meters to detect wet areas, and infrared cameras to tell how far the problem goes. After your home is inspected, a plumber can remove the affected drywall, repair the pipe, and then address your high water pressure problem.   

If you have a plumbing problem caused by high water pressure, don't hesitate to contact a professional plumber like Quest Plumbing.


Share